Sliding Door

Pouya Technic sliding door

in thicknesse 10 cm and produced in two models with heel and without heel. It has the following technical and appearance specifications:

• Double-sided cover with pre-painted galvanized sheet with a thickness of 0.5 mm in white (RAL 9016)
• Equipped with the best quality fittings and materials.
• Equipped with special IPT lock (with safety mode from the inside).
• Has a special gasket around the door and floor for complete sealing and frost resistance.
• Polyurethane injection insulation with a density of 40 kg / m
• Use 1.25 thick galvanized sheet to make the frame and then paint with powder paint Electrostatic and baking in an industrial furnace that makes the door frame against impact, scratches Show more resistance to chemicals, corrosion, rust, climate change and sunlight.
• Special design and special bends of the dynamic door frame technique that completely covers the foam panel part and In addition to being beautiful and elegant, it gives it more strength. The main advantage of the metal frame is that It does not break and if it is damaged, it can be repaired and repaired. Also, the possibility of leveling and sealing Complete the door on the wall or panel has become easier for installers.
• Use special bolts to connect the door frame to the panel, which reduces the cold.
• Possibility of producing custom frames or custom sizes, possibility of installing heaters in the frame, Steel or aluminum frame and ...
• Possibility to order doors with colored sheets and stainless steel 304 and 316
• Possibility to order the door with a heating element around the door to prevent freezing around the door
• Possibility of complete sealing and regulation of the door in all directions
• Ability to install vision valves in different dimensions and shapes
• Ability to produce doors with panel or wall frames tailored to customer needs
• Ability to automate the door if ordered by the customer, which can be opened and closed electrically and They have remote control.
• Possibility of installing rail covers made of anodized aluminum on sliding doors to protect the rails and Pulleys against dust, moisture and sun